PDA

View Full Version : ZION - Long

rosow
08-25-2006, 01:50 AM
All,
Just doing my scans for the evening. This one came up for the second day in a row. Didn't trigger today. Now we have a blue bar inside day with a better R/R than yesterday. We'll see!! See attached.

Lenny
timo4sho
08-26-2006, 02:46 AM
All,
Just doing my scans for the evening. This one came up for the second day in a row. Didn't trigger today. Now we have a blue bar inside day with a better R/R than yesterday. We'll see!! See attached.

Lenny

Hi Lenny,

how did you get the weekly STF on the daily chart on your posted pic?
stevej
08-26-2006, 03:16 AM
Hi Lenny,

how did you get the weekly STF on the daily chart on your posted pic?

Set the multiplier to 5

hth
timo4sho
08-26-2006, 09:40 AM
Set the multiplier to 5

hth

Isn't that the standard setting in EOD?

So this is always the STF on the next higher timeframe, correct?
rosow
08-26-2006, 11:19 PM
Timo,
Yes this is new. Set the multiplier to 5 and put up a daily chart. The STF will reflect the weekly.

Steve,
I noticed in eSignal the weekly STF will have the same height for all 5 days of the week on a daily chart vs. MTP EOD the height changes each day. Don't know if this is important or not?? I also noticed that the EOD ATR stop no longer gives a price stop level like before like the current eSignal version but rather some type of multiplier of 1???

Lenny

PS - Thanks for allowing the ATR stop in EOD to be up along with the STF indicator at the same time!!
Ann
08-27-2006, 10:06 AM
This is chart I came up with. I didn't change the default setting for STF which is 5. How come the STF on my chart is different from that on rosow's chart?

BTW, I tried to change the STF multiplier to 1 and then back to 5, but the STF had no change at all. :confused:
Steve Griffiths
08-28-2006, 07:41 AM
Hi Ann,

Please make sure you are using the latest build 81 of EOD :)

Thanks

Steve
Steve Griffiths
08-28-2006, 07:43 AM
Hi Lenny,

the bulliten bopard is not the place for technical questions - please email support@MTPredictor.net, they will be able to help you.

Thanks

Steve
Ann
08-28-2006, 09:13 AM
Hi Ann,

Please make sure you are using the latest build 81 of EOD :)

Thanks

Steve


Thanks Steve!

Just fixed it.

I thought I was using the latest one. Apparently not.:o